Industrial Safety Supplies, Online Industrial Safety Degree & Gear

Industrial Sealants & Lubricants

Industrial Sealants & Lubricants

Filtres actifs

  • Permatex Super High Tack Gasket Sealant

    Non-hardening for easy disassembly. Keeps large gaskets in place during positioning and assembly. “Clean hands” formula won’t stain. Temperature range -65°F to 400°F (-54°C to 204°C); resists engine fluids including diesel fuels and synthetic oils.

  • LPS 3 Premier Rust Inhibitor

    Features

    • Safe on all metals
    • Safe to use on rubber, fabric, plastics, and paints
    • Self-healing, soft, waxy film
    • Provides non-sling lubrication
    • Prevents rust and corrosion
    • Protects for up to 2 years indoors
  • LPS 1 Greaseless Lubricant

    Features

    • Provides a dry, thin, lubricating film
    • Resists oil, dust, and dirt build-up
    • Ideal for delicate mechanisms
    • Removes carbon build-up from surfaces
    • Displaces moisture
    • Safe on paint, fabric, and most plastics
    • Used world-wide in aviation
    • VOC compliant in all 50 states
  • LPS 2 Heavy-Duty Lubricant

    Features

    • Strong, multi-purpose lubricant, and penetrant
    • Provides a non-drying, light, oily film for use on indoor/outdoor equipment
    • Reduces wear caused by friction and corrosion
    • Loosens rusted or frozen parts
    • Strong, multi-purpose lubricant and penetrant with added corrosion protection
    • No Chlorinated Solvents
  • LOCTITE 242® Thread Locker

    Loctite Threadlocker Blue 242 is designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. The product cures when confined in the absence of air between close fitting metal surfaces. It protects threads from rust and corrosion and prevents loosening from shock and vibration.

  • LOCTITE 577

    Thread Sealant - medium strength. General purpose. For overhead applications and fast application at low temperatures. Slow curing.

    LOCTITE 577 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies. The product provides an instant, low-pressure seal for metal pipes and fittings.

  • Loctite 222

    Threadlocking Adhesive - low strength. Easy disassembly. Suitable for all metal threaded assemblies.

    LOCTITE 222 is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and set screws. Good on low-strength metals which could fracture during disassembly, e.g. aluminium or brass. 

  • LOCTITE 572

    Your benefits

    • Suitable for coarse metal threads
    • Ideal where slow cure is required for adjusting the alignment of fittings
  • LOCTITE 542

    Thread Sealant - medium strength. For fine threads in hydraulic, pneumatic and general fittings. Fast curing.

    LOCTITE 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration.

  • Loctite 574

    Loctite® 574™ Flange Sealant seals close fitting joints between rigid metal faces and flanges. Because it is fast curing, it provides resistance to low pressures immediately after assembly of flanges.

  • DUST OFF 67 400ML AIR DUSTER

    The DUST OFF 67 400ML is a pressurized gas Dust Remover for a quick and safe removal of dust particles from electronics, optics, fine mechanisms and medical equipment. They provide a jet of dry inert gas that acts like compressed air for a quick removal of dust particles and other dry contaminants from delicate or inaccessible areas of electrical and electronic equipment.

  • Denso Tape

    • Non hardening and non cracking
    • Highly resistant to mineral acid, alkalis, salt and micro organism
    • Highly impermeable to water, water vapour and gases
    • Minimum roll length of 10m
    • Olive green tape
    • Average roll thickness of 1.15mm
    • Average weight of tape is 1.44kg /m2
    • Temperature range from -5°C to 45°C for application